The Elan PT1 is crafted from a bleached blond artificial wicker, which gives this fully woven piece a light and summer-like vibe in any outdoor area. The weathered texture and pale bleached colour of the wicker further accentuate the casual and coastal feel of the Elan PT1 living set. The frame of the Elan PT1 is designed to have no sharp edges, exhibiting an organic, continuous flow from the armrest to the backrest. This design is intended to maximise comfort, complementing the shape of the human body.
Wintons Teak uses quick drying foam that dries within 20 minutes even after pouring rain, this allows all manner of soft furnishing to remain outdoor and mold free. You never need to store the cushion indoors.
Pinch to Test The Quality Difference
Compared to commonly used polypropylene, Wintons Teak only uses high-density polyethylene (HDPE) for synthetic wicker which is never brittle and will retain its shape.
HDPE outdoor wicker should also retain its colour and texture over time.
Wintons Teak provides a 3-year warranty for your peace of mind.
Rich in Natural Oil
A-Grade Teak refers to the most mature part of the tree, found at the centre of the teak log. It is dense and rich in natural oil, which protects the timber from splintering and remains smooth even after years.
Our Teak Outdoor Furniture Never Need Oiling
Wintons Teak uses A-Grade Teak, which is rich in natural oil that acts as a film, preventing water from getting into the timber grain and rots it. Unlike other timber outdoor furniture that needs regular oiling and varnishing, you can simply leave Wintons Teak outdoor furniture out in the elements without any maintenance.
How to Prevent Timber Split, Crack and Mold Growth?
At least one month in a kiln-dryer
An additional 2 month of air-drying
Moisture Content of less than 10%
A total of 3 Months to properly season teak
Only Brass and Stainless Steel for 100% Outdoor Performance
At Wintons Teak we make sure that all hardware will remain rust-free, by using either stainless steel or brass fittings. What's more, all of our hardware can be replaced when needed.
Strong, Durable Reinforced Alu Frame
For load-bearing structures, it is often necessary to reinforce the aluminium bar. Also known as hardened aluminium, this process involves inserting a steel rod or solid timber into the hollow aluminium bar to strengthen the component. This not only allows the piece to carry more weight, but it also limits the welded component from flexing, which undermines its durability.
